Saw blade is a general term for thin circular knives used to cut solid materials. Saw blades can be divided into: diamond saw blades for stone cutting; high-speed steel saw blades for metal material cutting (without inlaid carbide heads); for solid wood, furniture, wood-based panels, aluminum alloys, aluminum profiles , radiator, plastic, plastic steel and other cutting carbide saw blades.
Carbide
Carbide saw blades include many parameters such as the type of alloy cutter head, the material of the base body, diameter, number of teeth, thickness, tooth shape, angle, aperture, etc. These parameters determine the processing capacity and cutting performance of the saw blade.
When choosing a saw blade, it is necessary to select the correct saw blade according to the type, thickness, sawing speed, sawing direction, feeding speed and sawing width of the sawing material.
(1) Selection of cemented carbide types Commonly used cemented carbide types are tungsten-cobalt (code YG) and tungsten-titanium (code YT). Due to the good impact resistance of tungsten-cobalt carbide, it is more widely used in the wood processing industry. The models commonly used in wood processing are YG8-YG15. The number after YG indicates the percentage of cobalt content. With the increase of cobalt content, the impact toughness and flexural strength of the alloy are improved, but the hardness and wear resistance are decreased. Choose according to the actual situation.
(2) The choice of substrate
⒈65Mn spring steel has good elasticity and plasticity, economical material, good hardenability in heat treatment, low heating temperature, easy deformation, and can be used for saw blades that do not require high cutting requirements.
⒉ Carbon tool steel has high carbon content and high thermal conductivity, but its hardness and wear resistance drop sharply when subjected to a temperature of 200 ℃-250 ℃, the heat treatment deformation is large, the hardenability is poor, and the tempering time is long and easy to crack. Manufacture economical materials for cutting tools such as T8A, T10A, T12A, etc.
⒊ Compared with carbon tool steel, alloy tool steel has good heat resistance, wear resistance, and better handling performance.
⒋ High-speed tool steel has good hardenability, strong hardness and rigidity, and less heat-resistant deformation. It is an ultra-high-strength steel with stable thermoplasticity and is suitable for manufacturing high-grade ultra-thin saw blades.
(3) Selection of diameter The diameter of the saw blade is related to the sawing equipment used and the thickness of the sawing workpiece. The diameter of the saw blade is small, and the cutting speed is relatively low; the larger the diameter of the saw blade, the higher the requirements for the saw blade and sawing equipment, and the higher the sawing efficiency. The outer diameter of the saw blade is selected according to different circular saw models and the saw blade with the same diameter is used.
The diameters of standard parts are: 110MM (4 inches), 150MM (6 inches), 180MM (7 inches), 200MM (8 inches), 230MM (9 inches), 250MM (10 inches), 300MM (12 inches), 350MM ( 14 inches), 400MM (16 inches), 450MM (18 inches), 500MM (20 inches), etc., the bottom groove saw blades of the precision panel saw are mostly designed to be 120MM.
(4) Selection of the number of teeth The number of teeth of the saw teeth. Generally speaking, the more teeth are, the more cutting edges can be cut in a unit time, and the better the cutting performance is. High, but the sawtooth is too dense, the chip capacity between the teeth becomes smaller, and it is easy to cause the saw blade to heat up; in addition, there are too many sawtooths, and if the feed rate is not properly matched, the cutting amount of each tooth is very small, which will aggravate the friction between the cutting edge and the workpiece. , affecting the service life of the blade. Usually the tooth spacing is 15-25mm, and a reasonable number of teeth should be selected according to the material to be sawed.
(5) Selection of thickness The thickness of the saw blade Theoretically, we hope that the thinner the saw blade, the better, and the saw seam is actually a kind of consumption. The material of the alloy saw blade base and the manufacturing process of the saw blade determine the thickness of the saw blade. If the thickness is too thin, the saw blade is easy to shake when working, which affects the cutting effect. When choosing the thickness of the saw blade, the stability of the saw blade and the material to be sawed should be considered. The thickness required for some special-purpose materials is also specific, and should be used according to the requirements of the equipment, such as slotting saw blades, scribing saw blades, etc.
(6) Selection of tooth shape Commonly used tooth shapes include left and right teeth (alternate teeth), flat teeth, trapezoidal flat teeth (high and low teeth), inverted trapezoidal teeth (inverted conical teeth), dovetail teeth (hump teeth), and Common industrial grade three left and one right, left and right flat teeth and so on.
⒈ The left and right teeth are the most widely used, the cutting speed is fast, and the grinding is relatively simple. It is suitable for cutting and cross sawing various soft and hard solid wood profiles and MDF, multi-layer boards, particle boards, etc. The left and right teeth equipped with anti-rebound force protection teeth are dovetail teeth, which are suitable for longitudinally cutting various boards with tree knots; the left and right teeth saw blades with negative rake angle are usually used for sticking due to sharp teeth and good sawing quality. Sawing of panels.
⒉ The flat tooth saw is rough, the cutting speed is slow, and the grinding is the easiest. It is mainly used for sawing of common wood, and the cost is low. It is mostly used for aluminum saw blades with smaller diameters to reduce adhesion during cutting, or for grooving saw blades to keep the bottom of the groove flat.
⒊ Ladder flat tooth is a combination of trapezoidal tooth and flat tooth. Grinding is more complicated. When sawing, it can reduce the phenomenon of veneer cracking. It is suitable for sawing of various single and double veneer wood-based panels and fireproof panels. In order to prevent sticking of aluminum saw blades, saw blades with a large number of flat teeth are often used.
⒋ Inverted ladder teeth are often used in the bottom groove saw blade of panel saw. When sawing double veneer wood-based panels, the groove saw adjusts the thickness to complete the grooving process of the bottom surface, and then the main saw completes the sawing process of the board to prevent The saw edge is chipped.
5. The tooth shape is as follows:
(1) Alternate left and right teeth
(2) Ladder flat tooth Ladder flat tooth
(3) Dovetail anti-rebound dovetail
(4) Flat teeth, inverted trapezoidal teeth and other tooth shapes
(5) Helical teeth, left and right middle teeth
To sum up, the left and right teeth should be selected for sawing solid wood, particle board and medium density board, which can sharply cut the wood fiber structure and make the incision smooth; in order to keep the groove bottom flat, use the flat tooth profile or the left and right flat teeth. Combination teeth; Ladder flat teeth are generally selected for sawing veneers and fireproof boards. Due to the large sawing rate of computer slicing saws, the diameter and thickness of the alloy saw blades used are relatively large, with a diameter of about 350-450mm and a thickness of 4.0-4.8 Between mm, most of the flat teeth are used to reduce chipping and saw marks.
(7) Selection of sawtooth angle The angle parameters of the sawtooth part are more complicated and most professional, and the correct selection of the angle parameters of the saw blade is the key to determining the quality of sawing. The most important angle parameters are the front angle, rear angle and wedge angle.
The rake angle mainly affects the force expended to saw the wood chips. The larger the rake angle, the better the cutting sharpness of the sawtooth, the lighter the sawing, and the more labor-saving it is to push the material. Generally, when the material to be processed is soft, a larger rake angle is selected, otherwise, a smaller rake angle is selected.
The angle of the serrations is the position of the serrations when cutting. The angle of the saw teeth affects the performance of the cut. The biggest influence on cutting is the rake angle γ, the clearance angle α, and the wedge angle β. The rake angle γ is the cutting angle of the sawtooth. The larger the rake angle, the faster the cutting. The rake angle is generally between 10-15 °C. The clearance angle is the angle between the sawtooth and the machined surface. Its function is to prevent the sawtooth from rubbing against the machined surface. The larger the clearance angle, the smaller the friction and the smoother the processed product. The relief angle of the carbide saw blade is generally 15°C. The wedge angle is derived from the front and back angles. But the wedge angle should not be too small, it plays the role of maintaining the strength, heat dissipation and durability of the teeth. The sum of the front angle γ, the rear angle α, and the wedge angle β is equal to 90°C.
(8) Selection of Aperture Aperture is a relatively simple parameter, which is mainly selected according to the requirements of the equipment, but in order to maintain the stability of the saw blade, it is better to use the equipment with a larger aperture for the saw blade above 250MM. At present, the diameters of standard parts designed in China are mostly 20MM holes with diameters of 120MM and below, 25.4MM holes with diameters of 120-230MM, and 30 holes with diameters above 250. Some imported equipment also have 15.875MM holes, and the mechanical hole diameter of multi-blade saws is relatively complex. , more with keyway to ensure stability. Regardless of the size of the hole, it can be transformed by a lathe or a wire cutting machine. The lathe can be turned into a large hole with a washer, and the wire cutting machine can ream the hole as required by the equipment.
A series of parameters such as the type of alloy cutter head, the material of the base body, diameter, number of teeth, thickness, tooth shape, angle, and aperture are combined into the whole of the carbide saw blade. Only reasonable selection and matching can make better use of its advantages.
Post time: Jul-09-2022